So I a have begun the process of making the manual swap in my car. It was pretty much straight forward and most of the info on how to do the swap can be found here . The only two issues that I ran into were that during my research I overlooked the fact that the bracket that bolts the transmission mount to the gearbox is different from the one that bolts to the auto transmission. The auto one sits higher while the manual one sits a little bit lower. The other issue I ran into was that the gearbox I purchased did not come with the little bracket that holds the two shifter cables in place. I'm working on getting both those brackets but everything else went pretty smoothly especially getting the gearbox in which I know can be a pain but it wasn't this time around. Here are few pictures I was able to snap during the process.
0 Comments
Leave a Reply. |
Archives
September 2018
About the AuthorI am a Starlet enthusiast who has been previlaged to own 4 starlets to date and have picked up a few things about these little vehicles. There is always more to learn and im always willing to share info and thats what my aim is with this site. Categories |